Top Brands, Trade Prices!
Login / Register
Trade Insulations
0 items / £0.00
Menu
Trade Insulations
0 items / £0.00
  • Home
  • Insulation
  • Plasterboard
  • Brands
  • Blog
UK Nationwide Delivery
Approved Supplier
Home Brands Superglass Superglass Superwall 36 125mm Superglass Superwall 36
Superglass

125mm Superglass Superwall 36

Call for Price

  • Description
  • Product Attributes
  • Reviews (0)
  • About Superglass
Description

Superglass Superwall 36 cavity wall batt is a Glass Mineral Wool roll, designed to improve the thermal conductivity of your home or work environment. Superwall is designed for fill in external masonry cavity walls, up to 25 meters in height. (Additional requirements apply for buildings above 12 metres in height for full fill and above 25 metres in height for partial fill).

Key Features:

  • Zero Ozone Depletion Potential & zero Global Warming Potential.
  • CFC & HCFC free.
  • BRE Global verified Environmental Product Declaration (EPD)
  • Non-hygroscopic
  • Water repellent
  • Allows vapour to pass freely through the insulation,
  • Will not transmit water to the inner leaf

It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification. The slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould, or bacteria. Multi-rolls contain no ozone-depleting substances or greenhouse gases. This product is manufactured from up to 84% recycled glass.

Superglass wall batts are extremely durable and when installed correctly, they will have a life span that lasts for as long as the building does.

The Superglass cavity wall batts are tightly compact and lightweight which makes storing, handling, and installing the insulation quick and easy. Extra care should be taken to avoid crushing edges or corners of the batts. Glass and Rock Mineral Wool products are easier to install than other insulation materials such as rigid boards as the flexible material allows them to adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps. The absence of air gaps is crucial to achieving a high-quality thermal performance.

For long term protection on site, the product should be clean, dry, and undamaged and stored indoors or under a weatherproof covering. The polythene packs are designed for short term protection only and they should not be left permanently exposed to the elements. If the product gets damaged, contaminated, or wet they must not be used.

Batts can be cut, using a sharp knife or fine-toothed saw, to fit around any openings including windows and doors, including air bricks etc. It is essential that cut pieces completely fill the relevant spaces and that no gaps are left in the insulation

Superglass Superwall 36 can be installed in a range of methods. These methods include:

  • Full in new external masonry cavity walls
  • Partial fill in new external masonry cavity walls
  • Block outer with block inner leaf
  • Brick outer with block inner leaf

Safety Certifications:
BS EN 13162 Thermal insulation products for buildings – Factory made mineral wool
BS EN 13172 Thermal insulation products – Evaluation of conformity
BS EN ISO 9001 Quality Management Systems (QMS)
Generic BRE Green Guide Rating of A+
Manufactured in accordance with ISO 14001 – Environmental Management Systems
Reaction to Fire Classification A1

More Information:
Brand: Superglass Superwall 36
Length: 1200mm
Width: 455mm
Thickness: 50mm, 75mm, 85mm, 100mm, 125mm, 150mm
Material: Glass Mineral Wool
Thermal Conductivity: 0.036W/mK

Datasheet:

ThicknessThermal ConductivityThermal ResistanceLengthWidthArea Per PackPacks Per Pallet
500.0361.3512004558.7430
750.0362.0512004555.4630
850.0362.3512004554.3730
1000.0362.7512004554.3730
1250.0363.4512004553.2830
1500.0364.1512004553.2830

If this is not what you’re looking for, Trade Insulation supplies a wide range of insulation materials by several brands such as Celotex, Isover, Rockwool, Actis, Kingspan and many more to find the best product for your project.

If you need any further information on a product or can’t find what you are looking for, why not give us a call or email today and our team will be happy to help. Remember to keep an eye out for our special offers once in a while.

How to insulate a full fill masonry cavity wall

  1. Build a section of the inner leaf, with the first row of wall ties, at maximum 600mm horizontal spacings, where the insulation is to be begin. Placing wall ties directly onto the damp proof course (DPC) is not recommended. The first run of batts may begin below DPC level (minimum 150mm) to provide edge insulation for the floor.

 

  1. The leading leaf (brick or block) is then built up to the required height, with wall ties placed at a vertical spacing of 450mm ensuring the drip of the tie is located halfway across the remaining cavity width. Ensure excess mortar is cleaned from the cavity face of the leading leaf, and the batts placed on the wall ties behind the retaining clips, to form a run of batts joint and closely butted.

 

  1. The batt should be compressed slightly and placed between the upper and lower wall ties to form a closely butt-jointed run. The drip on each of the upper wall ties is inserted into the top of the batt and must be positioned to shed water away from the inner leaf. This is important to ensure that it functions correctly. The other leaf is built up to the same level as the batt, with its inner face in contact with the batts.

 

  1. Consecutive sections of the wall, incorporating wall ties, are constructed and the batt installed proceeds up to the required height. Vertical joints must be staggered, and all joints tightly butt to avoid thermal bridging. The batts should be carefully cut to fit any protrusions in the wall or extra wall ties.

 

  1. For wide cavities, it is possible to use two layers of batts with vertical joints staggered both between layers and within layers. Appropriate wall ties should be used to accommodate the extra width of cavity; if unequal thicknesses of batts are used, the thinner layer should be placed nearest the outer leaf. Batts should be installed to the highest level of each wall.

 

  1. Where additional wall ties are required at less than 450mm vertical spacing, the batts must be cut and tidily fitted around them. Under no circumstances should the batts be pierced by the ties.

 

  • Additional wall ties may be required to fulfil the structural requirements to ensure sufficient retention of the product or cut pieces.

Slab Size

125mm

Brand

Superglass

Product Attributes
Slab Size

125mm

Brand

Superglass

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “125mm Superglass Superwall 36” Cancel reply

Your email address will not be published. Required fields are marked *

About Superglass
Superglass was founded in 1987 manufacturing in Stirling, Scotland. In 2005 Superglass became the UK’s leading manufacturer of glass mineral wool insulation. In 2017, Superglass became part of the TN International group of companies, a global leader in the manufacture of building supplies. Superglass supplies high-quality products whilst remaining sustainable. Superglass’s waste and fibre waste are recycled to prevent going to the sewer or landfill; advances in their melting process mean they use less energy during production; products are compress-packed to around one-ninth of their original volume, reducing transport costs and the amount of packaging. Superglass products are made from up to 84% recycled glass, which reduces waste disposal and saves valuable resources – giving Superglass products a Generic BRE Green Guide rating of A+.
SKU: superwall36-125 Categories: Cavity Slabs, Cavity Wall Insulation, Floor Insulation, Floor Insulation Board, Insulation Rolls, Roof Insulation, Soundproof Insulation, Superglass, Superglass Superwall 36, Wall Insulation

Related products

Celotex Insulation Board
Quick view
Add to basket

20mm Celotex Insulation Board – TB4020 (2400mm x 1200mm x 20mm)

Celotex
Rated 3.50 out of 5
£18.00 ex VAT
Celotex Insulation Board
Quick view
Add to basket

110mm Celotex Insulation Board – XR4110 (2400mm x 1200mm x 110mm)

Celotex
Rated 5.00 out of 5
£52.26 ex VAT
Quick view
Add to basket

Rockwool Rollbatt 3 Roll 3650 x 400 x 150mm (4.38m2)

£64.29 ex VAT
Celotex Insulation Board
Quick view
Add to basket

70mm Celotex Insulation Board – GA4070 (2400mm x 1200mm x 70mm)

Celotex
Rated 5.00 out of 5
£33.19 ex VAT

Top brands, trade prices.

Registered Postal Address
4th Floor
18 St. Cross Street,
London, EC1N 8UN
Please note, the above is not our depot address.

Phone: 0203 983 5353
Email: sales@tradeinsulations.co.uk

Shop with confidence when you buy insulation online with us. We are SSL certified and all of our payments are processed by Paypal. You can also checkout using your card (no PayPal account required)

USEFUL LINKS

  • About Us
  • Blog
  • My Account
  • Contact
  • Delivery
  • Privacy Policy
  • Terms and Conditions
  • Price increase
Trade Insulations Ltd. Website by Marble Agency
payments
  • Home
  • Blog
  • Insulation
    • Insulation Boards
      • PIR Insulation Boards
      • Celotex Insulation Boards
      • Ecotherm Insulation Boards
      • Celotex Cavity Wall Boards
      • All Kingspan Insulation
      • Kingspan Kooltherm
      • Wall Insulation Board
      • Roof Insulation Board
      • Floor Insulation Board
    • Insulation Slabs
      • Rockwool RW Slabs
      • Rockwool RWA45 Slabs
      • Rockwool Flexi Slabs
      • Knauf Dritherm Cavity Slabs
      • Knauf Rocksilk Slabs
      • Knauf Earthwool Range
    • Material Type
      • Fireproof Insulation
      • Soundproof Insulation
      • Moisture Resistant Insulation
      • Fiberglass Insulation
      • Mineral Wool
      • Multifoil Insulation & Foil Insulation
      • Insulated Plasterboard
      • Phenolic Insulation
      • Polystyrene Insulation
      • EPS Insulation
    • Application Type
      • Floor Insulation
        • Underfloor Insulation
      • Wall Insulation
        • Cavity Wall Insulation
        • Partition Wall Insulation
        • Party Wall Insulation
      • Roof Insulation
        • Pitched Roof Insulation
        • Flat Roof Insulation
      • Loft Insulation
    • Insulation Rolls
      • Loft Insulation Roll
      • Acoustic Rolls
      • Knauf Loft Roll
    • Insulation Accessories
      • Tape
      • Drylining Metal
      • Plaster / Adhesives
      • Brackets
      • Coating
  • Plasterboard
    • Plasterboards
      • Knauf Plasterboards
      • Siniat Plasterboards
      • British Gypsum Gyproc Wallboard
      • Wallboard
      • Fireproof Plasterboard
      • Moisture Resistant Plasterboard
      • Soundproof Plasterboard
    • Insulated Plasterboard
      • Celotex Insulated Plasterboards
      • Kingspan Insulated Plasterboards
      • PIR Insulated Plasterboard
  • Insulation Accessories
    • Drylining Metal
    • Plaster / Adhesives
    • Tape
    • Coating
    • Brackets
  • Brands
  • About Us
  • Contact Us
  • Login / Register
Shopping cart
close

Sign in

close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
More info Accept

Marc says:

A pleasure to deal with from placing the order on their website which has some of the most competitive pricing to keeping me informed about the speedy deliver.

Great service - thank you.

WhatsApp us