Knauf Frametherm 32 140mm Roll

FrameTherm Roll 32 is a Glass Mineral Wool roll, designed to improve the thermal conductivity of your home or work environment. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification and is manufactured using Knauf Insulation’s unique bio-based binder, ECOSE Technology. The Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould, or bacteria. These durable rolls when installed correctly have a never-ending life span. FrameTherm Rolls contain no ozone-depleting substances or greenhouse gases.

Key Features:

• Designed to friction fit between timber studs, which prevents air movement and infiltration through or around the insulation, minimising heat loss.
• Ready cut to allow quick and simple installation, maximising on-site efficiency when compared with alternative insulants.
• Non-combustible
• Easily split as per requirements
• Provides thermal as well as acoustic performance.
• Easy to handle and install
• Roll arrangement permits ready installation.
• Extremely durable and long lasting.
• Awarded the DECLARE ‘Red List Free’ label. No ingredients in the product that are on the red list – including formaldehyde or phenol.

The Knauf FrameTherm 32 rolls are tightly compact and lightweight which makes storing and handing easy, as well as installing the insulation. For longer term protection on site, the product should either be stored indoors, or under cover and off the ground. The rolls polythene packs are designed for short term protection only and they should not be left permanently exposed to the elements. Glass and Rock Mineral Wool product are easier to install correct than other insulation materials such as rigid boards as their flexibility allows them to adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps. Evidence shows the absence of air gaps is crucial to achieving a high-quality thermal performance.

Earthwool FrameTherm Rolls and Slabs offer negligible resistance to the passage of water vapour and have a water vapour resistivity of 5.00 MNs/g.m. whilst the frametherm slabs cannot completely soundproof a space they provide excellent sound absorption characteristics.

ECOSE Technology is an innovative, new, formaldehyde-free binder technology, centred on rapidly renewable materials instead of petro-based chemicals. It lessens embodied energy and
provides superior environmental sustainability. ECOSE Technology was developed for glass and rock mineral wool insulation but offers the same potential advantages to other products where resin substitution would be an advantage, such as in wood-based panels, abrasives and friction materials.

Knauf FrameTherm Rolls can be installed in a range of methods. These methods include:

• Timber frame applications – between studs and rafters
• Warm roofs – at rafter level

Safety Certifications:

BS EN 13162, ISO 50001 Energy Management Systems
ISO 14001 Environmental Management Systems
ISO 9001 Quality Management systems
FIRE RATING – Euroclass A1 to BS EN 13501-1

More Information:
Brand: Knauf Frametherm 32 Roll
Length: 2.80m, 4.50m
Width: 2x570mm, 3x380mm
Thickness: 90mm, 150mm
Material: Glass Mineral Wool
Thermal Conductivity: 0.032W/mK

Datasheet:

How to insulate a wall using timber frame applications

The Frametherm 32 roll is available in roll widths of 2x570mm or 3×380 to suit spacing commonly used in timber frame applications. The 32 roll provides the best thermal conductivity in the range of just 0.032W/mK. FrameTherm Rolls are easily cut to size if necessary, using a sharp blade such as a Stanley knife. A heavy ruler or plank of wood can be used to hold the roll as its being cut, and a mat is recommended to ensure the floor or surface is not scratched when cutting.

• Protective gear such as protective overalls, goggles, face masks, and gloves are recommended to prevent irritation caused by the frametherm material.
• Make sure the space is clear and tidy to prevent hazards. Outlets such as electrical sockets and openings such as windows should be taken into consideration before the insulation process begins.

Step 1:

Measure the widths between the timber frame studs and match the thickness of the timber frames with the rolls of insulation material being applied which is typically 90mm or 140mm. Measure the length of the timber frame wall and cut the roll where necessary using a sharp blade to fit the stud.

Step 2:

The frametherm roll can then be firmly but carefully pushed into place, making sure all the edges are in place and secure without flattening the material as this will affect the performance of the roll. Make sure any rolls being joint together are tightly butted to avoid thermal bridging.

Step 3:

No fixings are required when fitting Frametherm rolls as the flexible material should fit snug between the timber frames. Complete the timber frame stud wall with plasterboard, the plasterboard can be applied to the timber frames using the necessary fixtures. It is then recommended to add joint tape and angle beads to the plasterboard to prevent cracking when plastered. The plasterboard can then be plastered, and finishing touches can be applied such as paint or wallpaper.

Please note this is just a guide and building professionals should always be consulted before any construction work takes place in your property.