Knauf Rocksilk 30mm RS45 Slab
Knauf Rocksilk RS45 Slab – 30mm is a high-performance insulation solution that is designed to provide excellent thermal and acoustic performance in a wide range of applications. The insulation slab is made from non-combustible mineral wool and is designed to be used in various industrial, commercial, and residential settings.
Knauf uses ECOSE Technology, which is an innovative, new, formaldehyde free binder technology, centred on rapidly renewable materials instead of petro-based chemicals. It lessens embodied energy and provides superior environmental sustainability. ECOSE Technology was developed for glass and rock mineral wool insulation, but offers the same potential advantages to other products where resin-substitution would be an advantage, such as in wood-based panels, abrasives and friction materials.
The benefits of using Knauf Rocksilk 30mm RS45 Slab
Excellent Thermal Performance – Knauf Rocksilk RS45 30mm Slab has a thermal conductivity of 0.035 W/mK, which makes it an excellent choice for applications that require high levels of insulation. This can help to reduce heat loss and improve energy efficiency, leading to cost savings on heating and cooling bills.
Exceptional Acoustic Performance – The product has a sound absorption coefficient of 1.00, which means that it is highly effective at absorbing sound and reducing noise levels. This can help to create a more comfortable and productive environment in commercial and residential buildings.
Non-Combustible – 30mm RS45 Knauf Rocksilk is non-combustible, which means that it will not burn or contribute to the spread of flames in the event of a fire. This can help to improve fire safety in buildings and reduce the risk of property damage and loss of life. Featuring Euroclass A1 reaction to fire classification.
Environmental Sustainability – The product is made from up to 97% recycled glass and is fully recyclable at the end of its life. This can help to reduce the environmental impact of building projects and contribute to a more sustainable future. The manufacturing process used to produce Knauf Rocksilk RS45 Slab – 30mm is energy-efficient and has a low carbon footprint, which further contributes to its environmental sustainability.
Versatility – Knauf Rocksilk RS45 Slab – 30mm can be applied in a wide range of settings, Multi-application, Ground floors, Internal floors, Separating floors, Fabrication, Pitched roofs at rafter level, Internal walls / partitions, Light steel frame walls andTimber frame walls.
Easy to Handle and Install – RS45 Knauf Rocksilk Slab – 30mm is easy to handle and install, making it an ideal choice for both new construction and retrofit projects. This can help to reduce installation time and labour costs. Mineral Wool products are easier to install correctly when compared to other insulants like rigid PIR boards because they adapt to any slight imperfections in the substrate and knit together, preventing any air gaps. Evidence shows the absence of air gaps is crucial to achieving the full thermal potential.
How to Install Knauf Rocksilk 30mm RS45 Slab
Installing Knauf Rocksilk RS45 Slab is a relatively straightforward process that can be completed by experienced builders or insulation contractors. Here are the general steps involved in installing Knauf Rocksilk RS45 Slab – 30mm:
- Prepare the Work Area – The work area should be cleaned and free of any debris or obstacles. The insulation should be stored in a dry, protected area until it is ready to be installed.
- Measure and Cut the Insulation – Measure the area where the insulation will be installed and cut the insulation to the appropriate size using a sharp knife or insulation saw. Be sure to wear protective gloves and eye gear during this process to avoid injury.
- Install the Insulation – Place the insulation in the area where it will be installed, ensuring that it is tightly packed and properly secured. Use a stapler or adhesive tape to hold the insulation in place.
- Seal Any Gaps – Once the insulation is installed, seal any gaps or cracks with a suitable sealant to prevent air leaks and improve energy efficiency.
- Finish the Installation – Once the insulation is installed and sealed, the work area can be finished as desired. For example, drywall or other finishing materials can be installed over the insulation to complete the wall or ceiling.
It is important to follow all safety guidelines and manufacturer instructions when installing Knauf Rocksilk RS45 Slab – 30mm. Protective gear, such as gloves and eye protection, should always be worn during installation to avoid injury. In addition, care should be taken to avoid compressing the insulation, which can reduce its effectiveness.
Correctly storing Knauf Rocksilk RS45 Slab – 30mm
To properly store Knauf Rocksilk RS45 Slab – 30mm, it is important to ensure that the insulation is kept in a dry, protected area. Moisture can reduce the effectiveness of the insulation and lead to the growth of mould and bacteria. Therefore, it is important to keep the insulation covered with a plastic or waterproof sheet to protect it from moisture and other environmental factors.
Additionally, care should be taken to avoid damaging Knauf Rocksilk RS45 Slab – 30mm during storage. This can include handling the insulation carefully and avoiding placing heavy objects on top of it or dragging it across rough surfaces. Following the manufacturer’s instructions for storage can also help to ensure that the insulation remains in good condition and retains its effectiveness.
What is the thermal conductivity of Knauf Rocksilk RS45 Slab?
The thermal conductivity of Knauf Rocksilk RS45 Slab is typically 0.035 W/mK.
What is the density of Knauf Rocksilk RS45 Slab?
The density of Knauf Rocksilk RS45 Slab is typically 45kg/m³.
What applications is Knauf Rocksilk RS45 Slab suitable for?
Knauf Rocksilk RS45 Slab is suitable for a range of applications including thermal and acoustic insulation for walls, floors, and roofs in both domestic and commercial buildings.
Is Knauf Rocksilk RS45 Slab easy to install?
Yes, Knauf Rocksilk RS45 Slab is designed to be easy to install. It can be cut to size using a saw or a knife and can be friction fitted between studs, joists or rafters.
Is Knauf Rocksilk RS45 Slab fire resistant?
Yes, Knauf Rocksilk RS45 Slab is fire resistant. It has been tested to BS EN 13501-1 and has a Euroclass A1 rating, which is the highest level of fire resistance.
Is Knauf Rocksilk RS45 Slab environmentally friendly?
Knauf Rocksilk RS45 Slab is made from a high percentage of recycled glass and has a low global warming potential. It is also fully recyclable at the end of its life.
|1200 × 600 mm
|Pieces Per Pack
Rock Mineral Wool
Knauf Rocksilk (RS45)