Kingspan K108 60mm is an insulation material manufactured with a phenolic core. The K108 Cavity wall insulation board has a thermoset fibre-free rigid phenolic core. Furthermore, the K108 board has a low emissivity composite foil facing on both sides.
Thermal – K108 has a thermal conductivity of just 0.019W/mK. The thermal conductivity means less heat will pass through the insulation boards. As a result, this will keep internal temperature level. The thermal properties of the K108 60mm will also prevent heat and energy escaping the walls of the building and because of this the building will be a much more comfortable space.
Sustainability – K108 cavity wall insulation will help by reducing the heat levels lost through the building. This will reduce the contribution to global warming and in conclusion, have positive effects on climate change. Moreover, the lack of heat loss can save money on energy bills up to 30%.
Resistance to solvents, fungi & rodents – The board is resistant to short-term contact with most dilute acids and other fluids. Clean spills off before the boards are installed. Do not use damaged boards with long contact to harsh solvents. K108 boards resist attack by mould and microbial growth. The board’s core does not provide food value to vermin.
Key Features of 60mm K108 Kingspan
- Lightweight as well as easy to cut, handle, and install
- Great thermal qualities
- Temperature controlled internal climate
- Saves money on monthly bills
- Long lasting lifespan
- Durable and reliable
- Full fill cavity insulation
- Resists moisture penetration
- Unaffected by air infiltration
- Non-deleterious material
- Free from harmful gases (CFC and HCFC)
- They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)
60mm K108 Cavity wall insulation is 1200mm x 450mm with thermal conductivity of 0.019W/mK.
60mm Kingspan K108 Application
The K108 cavity wall boards are for partial fill masonry cavity wall insulation applications. K108 60mm boards are a rectangular shape. These boards are designed for easy installation fitted between wall ties.
The 60mm is a board designed for a specific application and most importantly, the K108 boards need to be installed whilst the walls are being built. The multi-purpose boards are designed for commercial, residential, and industrial buildings as well as new builds and refurbs. In addition, K108 can help to meet building regulations.
The boards are extremely durable and last lasting because the product performance will not reduce over time. In addition, the 60mm Cavity wall boards will last for as long as the building does. Therefore, the K108 60mm is a well-used product within the construction industry. Moreover, the thickness of the 60mm board means this board gives great quality thermal protection without taking up too much of the room.
Cut K108 cavity boards using a fine-toothed saw or a sharp knife. Use the sharp knife by scoring and snapping the boards and scoring the other side.
Always consult a building/construction professional before insulating your property because this can be a costly and time-effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note, this is a guide only.
Note, the use of a cavity batten or cavity board is recommended to protect board edges and maintain a clear cavity.
How to Install K108 60mm Cavity Wall Boards
For a solid concrete ground floor, install the first row of wall ties is in the inner leaf at 600 mm horizontal centres a minimum of one course of blockwork below the damp proof course or 150 mm (for the UK) and 225 mm (for the Republic of Ireland) below the top surface of the ground floor perimeter insulation upstand, whichever is the lower.
Firstly, for a suspended timber floor, install the first row of wall ties in the inner leaf at 600 mm horizontal centres a minimum of 200 mm below the top surface of the ground floor perimeter insulation upstand.
After that, continue constructing the inner leaf up to the next wall tie course. (450 mm above the first). Position the next course of wall ties at the usual 900 mm horizontal centres in the UK and 750 mm horizontal centres in Ireland. Install the next course of blockwork to secure the ties.
Secondly, the first row of insulation boards should now be installed between the two rows of wall ties. Retain each insulation board tight against the inner leaf and lightly butt joints. Secure at a minimum of three points. After that, apply additional ties to satisfy the structural requirements or to ensure adequate retention of boards or cut pieces if needed.
Thirdly, build the outer leaf up to the level of the top of the boards and repeat the process. When insulating a gable, insulation boards should be continued 250 mm beyond the height of the top storey ceiling and a cavity tray installed above the insulation.
Furthermore, after raising each section of the inner leaf, before installation of the insulation board, excess mortar should be removed, and mortar droppings cleaned from exposed edges of the installed insulation boards.
60mm K108 Certifications
- ISO 9001: 2015 (Quality Management Systems. Requirements)
- ISO 14001: 2015 (Environmental Management Systems. Requirements)
- BS OHSAS 18001: 2007 (Occupational Health and Safety Management Systems. Requirements)
- BS EN ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use)
- The Harmonised Standard BS EN 13166: 2012 + A1: 2015 (Thermal insulation products for buildings. Factory made phenolic foam product).
|1200 × 450 mm
|Pieces Per Pack
Kingspan K108 Cavity Board