Knauf Soundshield Plus
Showing all 2 results
Knauf Soundshield Plus is a drywall material made up of a high-quality gypsum core and quality paper facings bonded to each side, designed to provide multi-purpose usage for sound reduction within your commercial or residential building. A must-have product with the building and construction industry.
Knauf Soundshield Plus is easy to cut and install and can be applied to a variety of applications within a building and has a variety of different products available to suit different construction needs including partitions, linings & ceilings with standard performance requirements.
Knauf Soundshield Plus is perfect for areas where sound reduction is needed. The Knauf Soundshield Plus plasterboard also supplies high impact and fire resistance. This is ideal for hospitals and schools. It is a cost-effective choice for linings, ceilings, and partitions with standard performance requirements.
Soundshield Plus Key Features:
- Available to suit any project
- Suitable for direct decoration or plaster finish
- Strong and adaptable
- Multi-purpose application
- A cost-effective choice
- Manufactured from high-quality gypsum
Knauf Soundshield Plus can be cut by first measuring the space the panel is required for. Mark the relevant measurement onto the board and cut using a fine-toothed saw. The board can be cut on a table or high surface to allow the saw to cut through the board. The board can also be cut by scoring the panel with a sharp knife and snapping.
Plasterboards are supplied on timber bearers. The packs should be lifted using a fork-lift truck and stacked not more than one-high on a flat surface to maintain good condition. Store the plasterboards in a clean and dry environment. Be cautious when moving not to knock the board’s edges and corners.
Simple and fast to install and can be paired with Knauf Metal Sections and accessories to provide a certified system. Knauf Performance Plus comes with an ivory paper face, making it easy to finish as well as to install. The boards can give 60 minutes of fire resistance from a single layer without the need for metal flat plates in horizontal joints and deflection heads.
Knauf soundshield can be installed in a range of methods. These methods include:
- Below rafter level
- Ceiling applications
- Timber frame wall applications
- Steel frame wall applications
- Partition Wall applications
- Manufactured in accordance with ISO 14001
- Manufactured to EN 520
- In full compliance with ISO 9002 and BS1230: Part 1: 1985.
Brand: Knauf Soundshield Plus
Length: 2400mm, 2700mm, 3000mm
Width: 900mm, 1200mm
Thickness: 12.5mm, 15mm
Thermal Conductivity: 0.24W/mK