Showing all 2 results

Knauf Vapour Panel is a drywall material made up of a high-quality gypsum core and quality paper linings on each side, designed to provide multi-purpose usage to provide a vapour barrier within your commercial or residential building. A must-have product with the building and construction industry. This simple product is easy to cut and install and can be applied to a variety of applications within a building and has a variety of different products available to suit different construction needs including partitions, linings & ceilings with standard performance requirements.

Knauf Vapour Panel

Knauf Plasterboard Vapour Panel 15mm (2400mm x 1200mm) – 2.88m2

£19.94 ex VAT
Knauf Vapour Panel

Knauf Plasterboard Vapour Panel 12.5mm (2400mm x 1200mm) (2.88m2)

£14.99 ex VAT

Knauf vapour panels can be cut by first measuring the space the panel is required for. Mark the relevant measurement onto the board and cut by using a sharp knife to score and snap or by using a fine-toothed saw. The board can be cut on a table or high surface to allow the saw to cut through the board.

Plasterboards are supplied on timber bearers. The packs should be lifted using a fork-lift truck and stacked not more than one-high on a flat surface to maintain good condition. Store the plasterboards in a clean and dry environment. Be cautious when moving not to knock the board’s edges and corners.

Simple and fast to install and can be paired with Knauf Metal Sections and accessories to provide a certified system. Knauf Performance Plus comes with an ivory paper face, making it easy to finish as well as to install. The boards can give 60 minutes of fire resistance from a single layer without the need for metal flat plates in horizontal joints and deflection heads.

The range uses 100% recycled paper liners from an FSC-certified paper mill. We use the most sustainable gypsum sources possible. Knauf Drywall plasterboard factories only use flue gas DE sulphurised (FGD) gypsum, a recycled material created as a by-product of controlling emissions from coal-fired power stations

Knauf vapour panel can be installed in a range of methods. These methods include:

  • Below rafter level
  • Ceiling applications
  • Timber frame wall applications
  • Steel frame wall applications
  • Partition Wall applications

Safety Certifications:
Manufactured in accordance with ISO 14001
Manufactured to EN 520
In full compliance with ISO 9002 and BS1230: Part 1: 1985

More Information:
Brand: Knauf Vapour Panel
Length: 1800mm, 2400mm, 3000mm
Width: 900mm, 1200mm
Thickness: 12.5mm, 15mm
Material: Gypsum
Thermal Conductivity: 0.19W/mK